OBD Code P0344 - Camshaft Position Sensor A Circuit Intermittent (Bank 1)
<<See All OBD Codes
Facing issues like abnormal drive and problems with the throttle? Did you notice drop in the fuel efficiency and the constant stalling of the engine? Is your car’s Check Engine Light turning on more recently? All these indicate problems with the camshaft profile control circuit, flashing OBD Code P0344 error.
OBD-II Code P0344 is defined as a Camshaft Position Sensor Circuit Intermittent
Learn More About OBD Error Code P0344
The Camshaft Position Sensor measures the exact rotational position of the camshaft in relation to the Crankshaft. This provides a critical data signal used by the Powertrain Control Module (PCM) to control Ignition Spark and Fuel Injector Timing. From the year 2000, the Camshaft Sensor is responsible for providing critical data to the Variable Valve Timing System which increases power and fuel economy while lowering emissions. When this signal is interrupted for any reason, code P0344 is set and the MIL or Check Engine Light is illuminated.
What causes this problem with the Camshaft Position Sensor A Circuit Low Input (Bank 1)?
- An open or shorted camshaft position sensor
- A faulty camshaft position sensor
- Poor electrical connection to the camshaft position sensor
- A faulty starter motors
- A weak or dead battery
- A short in the starting system circuit
Replace/Repair These Parts To Fix OBD Code P0344
- Camshaft Sensor - Replace faulty camshaft sensor and it is the prime reason for OBD code P0344 error. Buy new parts now!
- Powertrain Control Module - The PCM can also be faulty and thus may require replacement or reprogramming. Buy new computer modules now!
- Diagnostic Tool -In order to fix these errors, you need few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so and resolve all your vehicle problems. Visit today!
- Starter Motor - If the starter motor is not functioning properly, it must be replaced immediately. Buy new motors form us now!
- Car Battery & Cables - It’s better to check for the faults in relation to the car battery and the cables and replace them immediately. Buy best quality parts from us!
- Ignition Spark Plug - If the spark plugs are damaged, it should be immediately replaced. Buy and replace them as required.
- Timing Belt and Pulleys - Fault in the timing belts and the pulleys will affect the overall performance and the timing. Buy new timing belts and parts from us.
Symptoms Of OBD Error Code P0344
Reduced power from engine, problems with fuel delivery system resulting to high fuel consumptions and electrical/wiring problems are few of the indicatives of P0344 code error. Visit Parts Avatar Canada to get genuine replacement parts for your vehicle available for all makes and model be it Volvo, Chevrolet, Ford, Dodge, Porsche, Ford, Land Rover, Audi, Hyundai, Fiat, etc. This error may also indicate problems that will likely affect:
Common Symptoms
- Check Engine Light On indicating P0344 code problems
- Damage in fuel delivery system causing degrade in engine response
- Engine stalling and not starting
- Poor throttle response due to improper fuel combustion
- Reduced fuel economy with increased consumption due to fuel pump leakages
- Altered power bands due to ill-timed fuel pressure system leading to poor engine timing
How To Correct P0344 Camshaft Position Sensor Circuit Range/Performance (Bank 1)
Have a look at some ways with which you can correct the P0344 code:
- Weak or dead battery replacement
- Chafed, melted, or otherwise damaged wiring replacement
- Cleaning electrical connections to the camshaft position sensor
- Camshaft position sensor replacement
- Crankshaft position sensor replacement
Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Camshaft Position Sensor, Powertrain Control Module, Ignition spark, Battery, Starter Motor and a lot more. We are sure that now all your issues would be resolved.
Easy Diagnosis Of Engine Error OBD Code P0344
P0344 can be diagnosed properly using advanced scan toolcapable of factory sensor readings. An experienced technician can collect and collate the data from the scanning tool to determine as to when the problem occurred. Physical checks and test runs are advisable to check is the error is returning or not.
Based upon the conditions of the test, possibly clearing the code, and road testing the car while monitoring the data, further diagnosis may be required. Diagnosis may require multiple tools such as:
- An OBD-II scanner is used by the technician in order to verify that the code is present, and check for other codes indicating the same of different problem at different level.
- To check the occurrence of error again, the previous data the collected and freeze and checked periodically.
- The wiring and connectors are check visually for loose connections, corrosion, or shorts that might be the cause of dampened performance and the OBD error code P0344.
- Specialized tools are used to test the camshaft/crankshaft sensors performance. These check if the error is occurring because of issue with the camshaft or crankshaft errors.
Common Mistakes When Diagnosing OBD Code P0344
Oftentimes the technician only emphasis on problems due to camshaft sensors neglecting many other components which might be responsible to P0344 error code flashing in the scanner. Thus, other components like exhaust systems, fuel delivery systems, electrical wiring and connections, valves and joint need to be examined as well to stop the error from flashing again.