BRAND NEW Edwards EMF10 Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV3, RV5, RV8,
RV12, E2M2, E2M5, E2M8, & E2M12 Vacuum Pumps (A46226000)
This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18. This EMF10 EMF-10 exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adaptor, 1 oil element filter and 1 odour element. The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes
blocked, an integral pressure relief valve opens. This filter is very efficient at 99.999% DOP test and is also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored.
Edwards EMF10 (EMF-10) Oil Mist Filter Specifications:
Fits Pump Models: RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, & E2M12
Inlet & Exhaust Flanges: ISO KF25
(NW25)
Dimensions: Height 7.5 x Width 5 inches
Weight: 1.5 lb
Material: Durable Plastic Body
Oil Filter Element: Epoxy Impregnated Glass Fiber
Replacement Oil Filter Part Number: A223-04-198
Edwards EMF10 (EMF-10) Part Number: A462-26-000
Edwards EMF
- Protection from oil mist emissions as required by COSHH and health and safety regulations
- Use of optional oil return kits results in reduced oil level maintenance and savings in pump oil
- If the oil element becomes blocked, an integral pressure relief valve opens
10 Outlet Mist Filter
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil.
The EMF10 mist filter is suitable for use with RV3, RV5 and RV8 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist.
Supplied with NW25 clamp, centering ring and 'O' ring, NW25 to 3/4 inch BSP adaptor.
Component parts of the EMF oil mist filters
1. Outlet
2. Odour element seal
3. Pressure relief valve assembly
4. Drain plug
5. Mist filter element O-ring
6. Inlet
7. Lower body (white)
8. Mist filter element
9. D-seal
10. Upper body (grey)
11. Odor element
12. Body half securing screws
13. Maximum oil level
14. Sight panel
Created with Sketch. Created with Sketch.
Edwards
MSRP: $375.00
Was: $374.85
Now: $345.00
(You save $30.00 )
SKU:A46226000Weight:2.00 LBSWidth: 9.00 (in) Height: 9.00 (in) Depth: 4.00 (in) Shipping:Calculated at Checkout- Overview
Product Description
Edwards EMF10 Oil Mist Filter NW25 for EMF10
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen
when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil.
The EMF10 mist filter is suitable for use with RV3, RV5 and RV8 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the
oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist.
Supplied with NW25 clamp, centering ring and ‘O’ ring, NW25 to 3/4 inch BSP adaptor.