How to put a window ac in a sliding window

If you live in a home that doesn’t have central air, you can remain comfortable on humid days by installing one or more window air conditioners. Since they're geared to cool one or two rooms, window air conditioners are usually more energy-efficient than using central air conditioning. The units offer a low-cost way to help you beat the summer heat.

1. 1.

   Pick the vertical-sliding window where you want to install a window air conditioner. The window should be within reach of a three-prong outlet. Using an extension cord or power strip likely can’t supply enough power to run your air conditioner. Measure the width of the window opening so you know how large your window air conditioner can be.

2. 2.

   Check the windowsill for rot or other damage. Weak windowsills likely won’t support the weight of your window air conditioner. You should repair the windowsill prior to installing your air conditioner or pick a different window.

3. 3.

   Place the mounting hardware on the windowsill or outside wall and attach it using the provided screws. Mounting hardware will lock your window air conditioner into place and keep it from falling out. The directions will tell you where on your windowsill to attach the mounting hardware. Depending on the hardware, you may have one bracket or two brackets to install. Use a level to make sure you’ve installed the hardware correctly.

4. 4.

   Prepare the air conditioner for installation. Some units have built-in extension panels that slide out to fill any gap that exists between the unit, once installed, and the window frame. If these panels are not in place on your unit, you can usually slide them into place along channels located on each side of the unit. You may need to screw these panels into place.

5. 5.

   Lift the unit and slide it into the window opening, placing it into the mounts. You should ask someone to help you, since the unit will be heavy. The air conditioner should simply lock into place, though check the directions that come with the mounting hardware and sill support brackets to be sure. If the unit doesn't lock into place, you may need to screw it into place using a screwdriver or electric drill. Once in place, the air conditioner shouldn’t be able to move, either side to side or up and down. If you can move the air conditioner by pushing on it, check and make sure it is fully in place.

6. 6.

   Close the window until the lower sash is flush against the top of the unit, which will help secure the air conditioner.

7. 7.

   Slide out the accordion panels to fill any gap that exists between the unit and the window frame. You may have to use a screwdriver or electric drill to loosen any screws locking the panels into place. The panels will usually attach with screws to the bottom edge of the lower sash, as will the mounting frame of the unit, once you've lowered the window into place. You may want to drill pilot holes into the sash before using a screwdriver or electric drill to screw in the sliding panels and attaching the mounting frame.

8. 8.

   Screw angle brackets to the upper sash so that it braces the lower sash. These brackets will help keep the window from being forced open. If the installation kit that came with your unit does not include these brackets, you can buy them at a home improvement store.

9. 9.

   Fill any gaps between the window and the air conditioner with foam insulation strips. Add a thick strip or roll of foam between the upper and lower sashes. These strips will help create an airtight seal.

   How to install air conditioner in sliding window horizontal? There are four steps you need to know on how to install your air conditioner in a horizontal sliding window; this article will discuss those steps below.

   Contents show

   1 Steps To Install Air Conditioner In Sliding Window Horizontal

   1.1 Step #1. Measure

   1.2 Step #2. Trim the wood and construct the frame

   1.3 Step #3. Put the frame together

   1.4 Step #4. Installation of AC

   2 Conclusion

   Numerous countries have limited air conditioners designed for double-hung windows that they desire to utilize in horizontally sliding windows.

   

   It is feasible to construct a structure to convert these air conditioners to sliding windows. This case happens if you tend to have a few of them. Furthermore, their prices are much lower than fixed units, mobile units, or central air.

   Usually, we tend to see horizontal sliding windows in our home specifically, in rooms. It is easy to build and install your air conditioner in that manner. However, you must not forget to prepare your materials before doing such a thing. Without it, you cannot do the installation successfully.

   You can install different types of air conditioners in your sliding window. Preferably, you must install portable, window, or ordinary air conditioners. I believe that central air conditioner or split types are not possible.

   If you want to know more about this topic, keep on reading!

    

   Steps To Install Air Conditioner In Sliding Window Horizontal

   It only takes a few steps to install your air conditioner. This process will help you attain your goal.

   To answer the question: how to install air conditioner in sliding window horizontal? Here are the following steps you need to remember:

    

   Step #1. Measure

   The first step you need to do is to measure your air conditioner width. Also, include outlets that protrude from the side in this calculation.

   Then, do not forget to estimate and calculate the height. This measured height must also be the height of the frame, not including the top or base lips.

   Next, you must also measure the length of the window opening (height). This measurement should be taken right up against the glass since it will provide you the tiniest opening length.

   Minimal mistakes can slant away from the window, resulting in an excessively lengthy height.

    

   Step #2. Trim the wood and construct the frame

   First, cut the desired length and width of your lumber. Then, consider the measurements you take to guide you.

   Place a shorter slab of two by four on the floor and secure the tips of the long slabs to the smaller piece. Use deck screws, two at each connecting point, considering the depth of the wood.

   Make a rectangle by inserting one small slab of two by four between the long ones on the opposite end. First, check to see if the edges are square.

   It is an excellent option to insert this rectangle into the window frame to ensure it works.

   It should be able to slip into place and rest against the glass panel. You may use screws to assist wedge it in position if it is a bit slack during the setup.

    

   Step #3. Put the frame together

   The next step is to rinse your air conditioning unit. Place the air conditioner in the framework with the bottom part against the outside. The upper lip is likely U-shaped, with the rear side slightly short.

   Place the final two-by-four piece over the top. But don’t tighten it just yet. Tilt the air conditioner so that the forward upright portion of the upper lip aligns perfectly with the front corner of the wooden frame. But, first, it is to find out where this section of two by four should go.

   Take a glance at the entire setup while you’re keeping the air conditioner in place to ensure it is leaning back enough.

   The experts designed air conditioners to tilt oppositely from the windowpane to empty. If you think this inclination is too little, remove this last piece of wood to make it less than 3.5 inches broad before putting it in position.

   Put this piece of wood in its proper location on the structure and label it. Label the rim of the front where it will come into contact with this piece of frame as well.

   This mark helps determine the size of the sheet of wood that will conceal the gap at the top of the frame. Disable the air conditioning unit again from the framework and replace it with this piece of wood.

    

   Step #4. Installation of AC

   Gently open the window and move the panel inside oppositely on the window structure to complete the installation. Fasten it into place with lengthy screws via the piece of wood and into the structure surrounding the window aperture if you wish to add more stability.

   Use angle brackets for the sides that you find hard to screw in. Install the air conditioner by sliding it into position and securing it with a screw. You may also use clamps to press the frame in place if it appears to be a bit slack.

   Lastly, do not forget to fill all the gaps that appear in your frame. The cool breeze from your AC can escape in those holes.

    

   Conclusion

   Again, there are only four steps you need to learn on how to install your AC on horizontal windows. First, do not forget your materials such as wood, screws, and the like.

   Doing this installation is not that hard. First, however, you must be aware of what air conditioner you own.