How to reprogram a genie garage door opener remote

Here is our quick Genie Opener and remote tutorial. We explain how to program a new or existing remote to your Genie garage door opener.

Please note, clearing the memory of your opener is an optional step. It will remove all remotes, cars, or keyless entries connected and require them to be reprogramed, but may be a good safety measure if you have lost your garage door remote. Otherwise, skip the memory clearing step and just program the remote.

Please give us a call if you need any further assistance with your garage or garage door opener.

Steps:

Optional- Clear Memory

1) Press and hold the program button until LED turns blue and begins flashing.

2) Then hold both the up and down arrows until the purple flashing turns blue.

Program the Remote

1) Press and hold the program button until LED turns blue and begins flashing.

2) On the remote you wish to program, press the desired button 2-3 times.

3) That's all! Your remote should now operate your garage door.

When it comes to garage door openers, Genie bills itself as "the brand you trust." One look at its product lineup and features like Intellicode, and it's clear how popular Genie garage door openers are. Whether you're setting up the door that's in your new home or you're replacing a remote, programming a Genie door opener remote is as easy as one, two, and three.

Advertisement

Video of the Day

Genie Remotes: Different but Similar

When you're programming a Genie remote, it will typically have one, two, or three buttons. Even four-button remotes exist. There are all sorts of model names and remote designs, but they're essentially very similar in how you'll program them. Why the different buttons, then? They correspond with the number of doors you have to operate. If you're looking to program a Genie universal door opener for a different brand, they have a slightly different process, and manuals are available on the company's website.

Advertisement

Things You'll Need

• Genie garage door opener remote
  

• Ladder

Programming a One-Button Remote

For an opener manufactured from 1995 to around 2010, there's usually a "Learn/Code" button, but for 2010 and later, opener buttons usually say "Program/Set." Both operate in the same manner, but each has slightly different lighting sequences for each action. Your specific opener model's instructions should be available for download on the Genie website.

Advertisement

To make things simpler, you may want to dim the lights so the operational LED lights display better on your unit. Also, when programming the remote, always descend the ladder and stand at least 5 feet away to ensure good communication between the unit and the remote. You shouldn't need to climb back up if it sets up properly. Some remotes will only give you 30 seconds between pressing the "Program" button and your remote button before you have to press the "Program" button again.

Advertisement

Step 1: Activate the Overhead Opener

Set up a ladder so you can safely and easily reach the "Program/Set" button on the powerhead. Press this button until the round LED light shines blue. Release it and the long LED light will blink purple.

Step 2: Program the Remote

Push and then release the remote button. The blinking, long LED light should stop blinking and turn to a solid purple light. Press the remote a second time, release it immediately, and both the long and the round LED lights will blink blue and then turn off.

Advertisement

Step 3: Test the Remote

The remote isn't fully programmed yet; testing it locks it into the remote's memory. Press and release the remote's button one more time. The door should now operate by opening or closing — the opposite of whatever position the door was in when you began.

Now, your remote is fully programmed. Pressing and releasing the button will open or lower the door as required.

Advertisement

Two- and Three-Button Remotes

The process for programming Genie multibutton remotes is the same as for the one-button remote. Each button is to be programmed for a different door. You'll have to repeat the process for each door's powerhead unit beginning in step 1 above, as the units work independently of each other. Simply remember which button is for which door; it's easy once you're using the remote regularly.

Before you begin reprogramming your Genie garage door remote, you’ll first need to gather a few necessary items.

Owner’s Manual

It’s helpful to have your Genie owner’s manual handy while programming your garage door remote because reprogramming directions will vary slightly by unit. If you don’t have a print version of your owner’s manual, all Genie owners’ manuals are available online.

Garage Door Opener

To reprogram your garage door remote, you’ll need to access your garage door motor. It may be helpful to use a ladder while using your unit, so have one available if necessary.

Garage Door Remote

When reprogramming your garage door remote, you’ll obviously need the remote itself. You can program multiple remotes at a time, so gather them all and have them ready to go.

What to Do

Reprogramming your remote is as simple as 1, 2, 3. Follow these easy steps to program all of your Genie garage door remotes.

1. Locate

First, locate the “Learn Code” button on your garage door opener. This button is usually found near the antenna but can vary slightly by unit. Once you’ve found the “Learn Code” button, you’ll also want to identify the LED indicator near it. This light will help you determine whether your reprogramming has been successful.

2. Press

Next, press and release the “Learn Code” button on your unit. The LED light should begin blinking to indicate that the system is working. Once the light is activated, press the button on the Genie garage door remote you want to program. The LED light on your unit should either flash or remain lit. Press the same remote button again, and the light should go out. When you press the button a third time, it should operate your garage door. If it doesn’t, carefully repeat this step.

3. Repeat

Complete the above steps for each remote that you want to reprogram. Most units can handle up to seven remote-operated devices.

If you need service on your residential garage door operator, contact WD Door. The team at WD has experience in installing, repairing, and replacing all major garage door opening systems. No matter what your garage door need may be, WD Door can handle it! Request your quote today.

How do I reset my Genie garage door clicker?

How do you pair a Genie remote?