What is the difference between standard and counter depth

If you want a small kitchen to feel more open or prefer your appliances to blend in, you should consider a counter depth refrigerator.

Counter depth refrigerators:

• Are usually a little more than 24 inches deep, not including the doors and handles
• Cannot be truly flush mounted
• Don’t hold as much food as a standard depth model
• Free up space in small kitchens
• Tend to cost more than a standard depth fridge

Credit: Getty Images

This counter depth refrigerator stands proud, but it still blends in with cabinetry. The overall effect is a streamlined, open kitchen.

A standard countertop is 24 inches deep, and the body of a counter depth refrigerator—not counting the doors or handles—is usually close to that depth. By comparison, the body of a standard refrigerator is usually the same width and height, but closer to 30 inches deep. There is no standard for what defines “counter depth”— but if you don’t want your fridge to stand out six inches from your counters, a counter depth model is your best bet.

There is no standard for what defines “counter depth”

That doesn’t mean a counter depth fridge will sit perfectly flush with your cabinets. First of all, a fridge’s doors can’t open if they’re pushed right up to cabinetry or counters. In addition, a counter depth fridge still needs the same breathing room as a standard depth model, so the back of the fridge should be at least an inch from the wall.

That means most counter depth fridges will stick out—“proud” in designer lingo—at least three or four inches. If you want a truly flush fridge, you’ll have to spring for a built-in model,but you’ll also have to pay at least $4,000 for the privilege, not including professional installation.

Credit: Getty Images

This is a standard depth fridge, and it's the unintentional focal point of this small kitchen. A counter depth fridge would really open up the space.

Even so, a counter depth fridge can save considerable space and make a house feel more open, especially in a galley kitchen.

Consider two otherwise identical fridges, the counter depth LG LFXC24796D and the standard depth LG LFXS30796D. Including doors and handles, the counter depth model is 30.875 inches deep, while the standard depth model is 36.25 inches deep. That’s almost half a foot of floor space saved—and more clearance with the fridge doors open, too.

Credit: Getty Images

This man looks a lot like Robert De Niro — and the body of his standard depth fridge is sticking out at least six inches from the cabinetry in his kitchen.

The tradeoff? Less space in your fridge. Most standard depth refrigerators can hold between 26 and 32 cubic feet of groceries, while the majority of counter depth fridges can only hold between 20 and 24 cubic feet. In addition, they tend to cost between 5 and 20 percent more than a comparable standard depth fridge.

Interested in a counter depth fridge? Check out our top lab-tested picks for the best counter depth fridges you can buy in 2017.

When you’re buying a fridge, chances are you only have a few criteria you’re shopping for, such as a sleek finish, a through-the-door water dispenser or smart features. But for some, the decision of whether or not to purchase a particular fridge comes down to its size.

There are standard-depth refrigerators and there are counter-depth refrigerators. They aren’t the same, and they each have stark contrasts in size, storage space, and price. But do you know which one you need?

Read on to learn about the nuances of a counter depth refrigerator vs. a standard one.

Credit: Getty Images

Standard-depth fridges will stick out past your cabinetry. Note how far this fridge extends beyond the shelves to its right.

A standard-depth fridge is one that can stand alone in your kitchen, in that it is not built into a cabinet. It may go along a wall, in a basement or garage, or somewhere that’s not necessarily preordained for a fridge.

On average, a typical standard-depth (aka full-size) refrigerator measures about 70 inches in height by 35.75 inches in width by 30 inches in depth, not counting the door or its handles.

Also keep in mind that the door is almost always factored into a standard-depth fridge’s measurements on a product page. While the width of a door will differ from fridge to fridge, on average they’re about 4 inches deep: You’ll need to manually subtract that from the “depth without the handle” figure from the fridge’s spec sheet. You’ll need this for apples-to-apples comparisons between standard- and counter-depth fridges.

What is a counter-depth fridge?

Credit: Getty Images

Standard-depth fridges will stick out past your cabinetry. Note how far this fridge extends beyond the shelves to its right.

Counter-depth refrigerators are sized to fit into a space that aligns with your kitchen cabinets.

While no industry-wide standardization dictates exact measurements, kitchen counters are usually 24 inches deep. Counter-depth fridges, in general, also aim to be about 24 inches deep, without counting the door or its handles.

This depth allows the fridge to sit more or less flush with your cabinetry, with only the door sticking out past it, which is a necessary concession, since the door needs enough clearance around its hinge in order to swing open.

Because their depth is anywhere from 6 inches to 12 inches less than a standard-depth refrigerator, counter-depths are at a significant disadvantage when it comes to storage space.

Why would you pick one over the other?

Credit: Getty Images

While less expensive and bigger on storage space, standard-depth fridges will stick out six or more inches beyond your cabinetry.

The difference between a standard-depth fridge and a counter-depth, on the surface, is just 6 inches. How can this possibly be a big deal?

The issue is that those missing 6 inches of depth actually affects more than you might realize.

The most obvious difference is lower overall storage space. Six inches may not sound like a lot, but when you consider the entire height and width of the missing area, it’s almost 8.75 cubic feet of missing space (minus any dividers between different compartments).

While a counter-depth fridge will likely offer enough storage space for one or two people, larger households will find them too small for their needs.

The other difference between a counter-depth refrigerator and a standard one is price. While it might seem intuitive that a smaller fridge equates to a cheaper fridge, shrinking down technology to cram into tiny spaces almost always results in a bump in the price. Counter-depth fridges are no different, and they often cost much more than a standard-depth option with the same height, width, and feature set.

Since counter-depth models offer less overall storage space and command a higher price, they’re more of a niche product, best suited for kitchens that can’t accommodate a full-size model, or for those who don’t mind paying extra for a fridge that sits more or less flush with the rest of their cabinetry.

Aside from spatial considerations and aesthetics, a standard-depth fridge will cost less and provide owners with more than its counter-depth counterpart.

The product experts at Reviewed have all your shopping needs covered. Follow Reviewed on Facebook, Twitter, Instagram, TikTok, or Flipboard for the latest deals, product reviews, and more.

Prices were accurate at the time this article was published but may change over time.

Which is better counter

Why are counter

What is considered standard counter

What is a standard depth refrigerator?