Document Side-by-Side Refrigerator Quick Start Guide OPERATING INSTRUCTIONSIMPORTANT: Before operating this appliance, make sure it has been properly installed according to the appliance’s Owner’s Manual. REFRIGERATORIMPORTANT: The refrigerator control adjusts the refrigerator compartment temperature. Every click on the “Temp Setting” button makes the refrigerator compartment colder (LED indicators on in 1 snowflake is Less Cold/LED indicators on in 2, 3, or 4 snowflakes is colder/All LED indicators on is coldest), once you get to the last level, the system will go back to the initial level. FREEZERThe freezer control adjusts the freezer compartment temperature. Settings to the front of the mid-setting make the temperature less cold. Settings to the back of the mid-setting make the temperature colder. NOTE: Adjusting the refrigerator and freezer controls to a higher (colder) than recommended setting will not cool the compartments any faster. TEMPERATURE SETPOINTSGive the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. The settings indicated in the previous section should be correct for normal
household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is
Online Ordering Information
SAVE THESE INSTRUCTIONS Documents / ResourcesPost navigationDocument Side-by-Side Refrigerator Quick Start Guide OPERATING INSTRUCTIONSIMPORTANT: Before operating this appliance,
make sure it has been properly installed according to the appliance’s Owner’s Manual. For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure that the both the refrigerator and freezer controls are still set to the “mid-setting.” This will be indicated with three illuminated bars. IMPORTANT:
TEMPERATURE SETPOINTSThe setpoint range for the refrigerator
and freezer is “1 bar” (least cold) to “5 bars” (coldest).
Refrigerator Control:
Freezer
Control:
DISPENSER LIGHTWhen you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, you may turn on the light. The dispenser lights are LEDs that cannot be changed. If it appears that your dispenser lights are not working, see online “Troubleshooting” for more information. DISPENSER LOCKThe dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.
Online Ordering InformationFor detailed
installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your appliance.
SAVE THESE INSTRUCTIONS W11396838A ®/™ ©2020 Whirlpool. All rights reserved. Documents / ResourcesPost navigationIs 1 or 5 colder on a Whirlpool fridge?On every fridge the rules for the coldest settings are always the following: The numbers on the fridge's temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.
What should my Whirlpool refrigerator be set at?The typical factory setting for Whirlpool® refrigerators is the recommended 37°F (3°C), but temperatures on all refrigerators may need to be set higher or lower depending on your fridge's environment and other factors. Read on to get more answers to your temperature questions.
|