BRAND NEW Edwards EMF10 Oil Mist Exhaust Filter, KF25 Ports, Designed for Edwards for RV3, RV5, RV8,
RV12, E2M2, E2M5, E2M8, & E2M12 Vacuum Pumps (A46226000) Show Edwards EMF10 (EMF-10) Oil Mist Filter Specifications: Edwards EMF
10 Outlet Mist FilterMist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. The EMF10 mist filter is suitable for use with RV3, RV5 and RV8 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist. Supplied with NW25 clamp, centering ring and 'O' ring, NW25 to 3/4 inch BSP adaptor. Component parts of the EMF oil mist filters1. Outlet 2. Odour element seal 3. Pressure relief valve assembly 4. Drain plug 5. Mist filter element O-ring 6. Inlet 7. Lower body (white) 8. Mist filter element 9. D-seal 10. Upper body (grey) 11. Odor element 12. Body half securing screws 13. Maximum oil level 14. Sight panel Created with Sketch. Created with Sketch. EdwardsMSRP: $375.00 Was: $374.85 Now: $345.00 (You save $30.00 ) SKU:A46226000Weight:2.00 LBSWidth: 9.00 (in) Height: 9.00 (in) Depth: 4.00 (in) Shipping:Calculated at Checkout
Product DescriptionEdwards EMF10 Oil Mist Filter NW25 for EMF10 Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen
when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. Product VideosCustom FieldProduct Reviews |