How to fix garage door after pulling cord

Automatic garage doors are a blessing as they reduce the work that needs to be done by the owner. But sometimes, the garage door malfunctions due to a lot of reasons. This means you have to pull the red garage door emergency cord to disengage the door to fix it. After disengaging the door, you have to know how to reset garage door after pulling red cord to get it working again.

There are a few simple steps to reset garage door after pulling the red emergency cord. First, you have to ensure the door is closed. Next, you need to check the release handle and then pull the cord towards the door. Next, you need to connect the trolley and the carriage and finally, test the door.

Let’s take a detailed look at how you can reset your garage door after pulling the emergency cord.  

How to fix the garage door after pulling the red cord?

Although automatic garage doors have lightened the workload of owners, they have their fair share of drawbacks. One of the biggest drawbacks of these garage doors is when they stop working after a power outage or any other reason. But like most other problems with garage doors, this one also has a solution. 

If you need to use your garage door after it has stopped working, you can disengage it after pulling the red cord hanging from the door’s top. Once you are done using the door and the power has come back, you have to reset the door. This is how to fix the garage door after pulling the red handle: 

1. Make sure the garage door is closed

Ensuring the door is closed is a must when it comes to doing anything that concerns engaging and disengaging a garage door. If you work on an open door, there is every chance that the door will come down on either you or your car, causing serious damage to the car or worse. So, whatever you do, make sure you have manually closed the door down.

2. Check the release handle

Once you bring the door to the down position, check the garage door release handle. This handle detaches the garage door from the door opener and is situated on the garage door track. Ensure the release handle is in its place. If the handle is not on the tracks, adjust it. 

3. Pull the red cord toward the garage door

Now you have to go towards the top of the door and pull the red cord again. But unlike when you emergency released the garage door, where you pulled the cord away from the door, you have to do the opposite here. Pull the cord towards the garage door and listen for a clicking sound. If you hear this sound, it will mean the springs of the garage door have retracted back into their place. 

4. Reconnecting the trolley and the carriage

When you disengage the garage door by pulling the emergency cord, the trolley of the door gets detached from the opener carriage. To reset the door, you have to reconnect these two. There are a couple of ways of getting it done. First, you can manually reconnect them by sliding the garage door along its track until you hear them getting reconnected. 

Second, if you have a remote for your garage door opener, click it. The trolley and the carriage will automatically get reattached. 

5. Check the door

Once you have performed all the steps mentioned above, it’s time to see if the door is working perfectly. Push the button of the garage door opener to see whether the door is moving up and down. If not, either repeat the process or call in a professional to reset the door. 

Why do you pull the red cord on the garage door?

Now you know how you can reset garage door after you have pulled the emergency cord. But should you pull it in the first place? Here are a few reasons why you can and should pull the red cord. 

• Power outage: During a power outage, your automatic garage door will stop working for a myriad of reasons. This is when you have to emergency release the garage door lock by pulling the red cord. 

• Garage door malfunctioning: Other than power outages, there are a lot of reasons the garage door might stop working. If you need to use the garage during this time, you have to pull the red cord to get in and out of the garage. 

• To perform repairs: When you perform repairs on your garage door, you have to make sure the door is disconnected from its opener. This is another reason to pull the red cord so that you can repair the door without any risks or other issues. 

Final Words

A garage door emergency cord can be a lifesaver if you know how and when to use it properly. Once you are done using the door in manual mode, you have to know how to reset garage door after pulling red cord for it to start working again. Makes sure you follow every aforementioned step meticulously to get your garage door up and running again. 

FAQs

1. Why is my garage door chain not moving?

Sometimes you will see that the motor of the garage door opener is running but the chain of the door is not moving at all. This can happen if the motor has some broken parts in it.

2. What happens when you pull the red cord on the garage door?

WHEN YOU PULL THE GARAGE DOOR’S RED CORD, IT DETACHES THE TROLLEY OF THE DOOR FROM THE CARRIAGE ON THE TRACKS. THIS ALLOWS YOU TO MANUALLY MOVE THE DOOR. 

3. Why won’t my garage door engage?

If you see that even after following the procedure mentioned above the garage door isn’t engaging, then you might have two issues. First, your garage door might have broken parts. Second, the door is having trouble getting connected with the door opener. 

How do I get my garage door to reconnect after pulling the release cord?

How do I reset my garage door after pull release?

How do you manually reconnect a garage door?