How to reset maintenance light 2010 toyota corolla

1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine) or turn ignition to run (one position before starting engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Many Toyota Corolla models are equipped with a maintenance reminder light that turns on at regular mileage intervals to remind the driver to get the engine oil changed. When a service technician changes the engine oil in the Corolla, he resets the maintenance light so it will not turn on again until the mileage threshold is reached. If the owner of the vehicle does the oil change themselves, she can also manually reset the maintenance-required light. The instructions for the 2010 Corolla apply to earlier models as well.

Step 1

Turn the ignition switch to the "Off" position.

Step 2

Press and hold the Trip Odometer Reset button.

Step 3

Turn the ignition switch to the "On" position. Do not start the engine. Continue to hold down the Trip Odometer Reset button.

Step 4

Release the Trip Odometer Reset button after "000000" appears on the trip odometer display and the maintenance light turns off.

References

  • "2010 Toyota Corolla Owners Manual"; Toyota Motor Sales, U.S.A., Inc.; 2009

Writer Bio

David Clair began writing for websites in 2001, creating online marketing content for business owners. He has written for Internet companies including eBay and creates training materials for an online education company. Clair is studying technical writing and pursuing an Associate of Arts in information technology from the University of Phoenix.

How do you reset the maintenance required light on a 2010 Toyota?

How to Reset the Maintenance Light on a Toyota.
Put your key in the ignition and turn it to position one, the position just before starting the car..
Push and hold the trip meter reset button on the dashboard, then turn your key to position two..
Continue holding the odometer button for 10 seconds..

How do you reset the maintenance light on a Toyota Corolla?

Turn Off Maintenance Light: Toyota Corolla - Trip Reset Button.
Place your key in the ignition, and turn it to the "On" position. ... .
Press and hold the trip reset button. ... .
Once these words display, return the key to the "Off" position..
While holding the trip reset button down, turn the key back to the "On" position..

How do I reset my 2010 Toyota Corolla?

How do you reset the ECU in a Toyota Corolla?.
Park your car..
Open your hood..
Disconnect the negative terminal from your car battery..
Leave the battery disconnected for about 15 minutes..
Reconnect the battery, turn on your car, and make sure the engine light is off..